CK45 42CrMo4 Hard Chromed Plated Piston Shaft Sanda Don Silinda Mai Ruwa
Cikakkun Hotuna
Ƙayyadaddun Fasaha
| Diamita | 6-300 mm |
| Tsawon | 100mm-1200mm |
| Karfe daraja | DIN CK45JIS 45C Saukewa: ASTM1045 Farashin 1045 AISI 1045 |
| Hakuri | ISO f7 |
| Kaurin Chrome | 20μm (min) |
| Hardness na chrome Layer | 850HV(min) |
| Tashin hankali | Ra 0.2μm (max) |
| Madaidaici | 0.2/1000mm |
| Kayayyakin Injini(ck45) | Ƙarfin Haɓaka ≥20MpaƘarfin ƙarfi ≥80 MpaTsawaitawa≥5% |
| Yanayin wadata | 1.Hard chrome plated |
| 2.Induction taurare | |
| 3. Ragewa & Haushi | |
| 4.Induction taurare tare da Q&T |
Haɗin Sinadari
| Kayan abu | C% | Mn% | Si% | S% | P% | V% | Cr% |
| ck45 | 0.42-0.50 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 |
| ≤0.25 |
| ST52 | ≤0.22 | ≤1.6 | ≤0.55 | ≤0.04 | ≤0.04 | 0.02-0.15 |
|
| 20MnV6 | 0.17-0.24 | 1.30-1.70 | 0.10-0.50 | ≤0.035 | ≤0.035 | 0.10-0.20 | ≤0.30 |
| 42CrMo4 | 0.38-0.45 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 | 0.07-0.12 | 0.90-1.20 |
| 40Cr | 0.37-0.45 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 |
| 0.80-1.10 |
Kayayyakin Injini
| Kayan abu | TS N/MM2 | YS N/MM2 | E%(MIN) | KYAUTA | SHARADI |
| CK45 | 610 | 355 | 15 | >41J | ARANTA |
| CK45 | 800 | 630 | 20 | >41J | Q + T |
| ST52 | 500 | 355 | 22 |
| ARANTA |
| 20MnV6 | 750 | 590 | 12 | > 40J | ARANTA |
| 42CrMo4 | 980 | 850 | 14 | > 47J | Q + T |
| 40Cr | 1000 | 800 | 10 |
| Q + T |
Marufi
Anti-tsatsa mai ga kowane sanda
Anti-tsatsa mai ga kowane sanda
Hannun takarda zuwa kowane sanda
Ko bisa ga Bukatun Abokin ciniki.
Muna Nufin Gamsar Da Ku!
Aikace-aikace
An fi amfani dashi don silinda na hydraulic, silinda pneumatic, ginshiƙan jagora
a cikin kayan aiki masu zuwa:
Injin Gine-gine, Ma'aikata, Injin Ma'adinai, Injin Texitile, Injin bugu.
